It is specially designed to be used as an additive and metalizedeect and enhance the beauty of tiling area. It should be mixed with epoxy-based tile groutto get sparkling joints. It is recommended to use in internal & external areas under wet & dryconditions on wall & floor.
| Sr. | Testing Properties | Test Result |
|---|---|---|
| 1 | Available Color | Silver, Copper, Gold, Red |
| 2 | Density | 1.5 g/ cc |
| 3 | Size | Approx. 0.2 mm |
| 4 | Water Solubility | Insoluble in Water |
| 5 | Melting Point | ≥ 170C̊ |
| 6 | Tentative Mixing Ratio(T02 SOLPOXY Epoxy: Sparkles) | 50 gm in 1 kg RTM 3 – 7% of weight of RTM Epoxy |
APPLICATION PROPERTIES T02-SOLPOXY EPOXY + J01-JARI(SPARKLE)
| Sr. | Testing Properties | Test Result |
|---|---|---|
| 1 | Mixed Density | 1.75 ± 0.05 kg/litre |
| 2 | Pot life @ 30°C | Approx. 60 minutes |
| 3 | Joint Width | 2–15 mm |
| 4 | Sag Resistant | No sag |
| 5 | Application Temperature | from +10°C to +35°C |
| 6 | Light Foot Traffic | 24 hours |
| 7 | Regular Traffic | 72 hours |
Note : Test results are indicative as per testing method specified in standard. Test results may vary as per substrate, site condition & testing machine etc. Actual field performance will depend on installation methods and site conditions.
