logo
logo

Contact Us

shop
Grouts

T-02 Solpoxy Epoxy Grout

1 kg , 5 kg

R2T: as per EN 12004 : 2009

RG: as per EN 13888 : 2009 & ISO 13007

Characteristics:

Three/Two – component chemical-resistant epoxy mortar/ grout for installation and grouting of tiles, mosaics and stones, where hygiene is of utmost importance such as Home, hospitals, laboratories, food & beverages industries, dairy industries, swimming pools, showrooms, airports and high trac areas.

Technical Information:

Sr. Testing Properties Test Result
1 Component Appearance Resin (Part A) – Clear Viscous liquid
Hardener (Part B) – Yellow Viscous liquid
Filler (Part C) – Colored powder
2 Mixing Ratio 200 (Resin) + 100 (Hardener) + 700 (Filler)
3 Mixed Material Consistency Smooth creamy paste
4 Mixed Density 1.75 ± 0.05 kg/ litre
5 Pot life @ 30°C Min. 60 minutes
6 Joint Width 2 – 15 mm
7 Sag Resistant No-sag
8 Application Temperature From +10°C to +35°C
9 Temperature of Use From –20°C to + 100°C
10 Light Foot Traffic 24 hours
11 Regular Traffic 3 days
12 Available Shades 30 shades

PERFORMANCE PROPERTIES

Sr. Testing Properties Test Result
1 Compressive Strength after 7 days ≥ 50 MPa
2 Flexural Strength after 7 days ≥ 30 MPa
3 Shear Adhesion Strength after 14 Days < 30 KN
4 Water Absorption > 0.5 g
5 Pull-off Adhesion Strength < 1.5 Mpa (Concrete failure)

Note : Test results are indicative as per testing method specified in standard. Test results may vary as per substrate, site condition & testing machine etc. Actual field performance will depend on installation methods and site conditions.

3 Component | 30 Colours
Particulars 1 kg 5 kg
Resin 200gm 1000gm
Hardner 100gm 500gm
Filler Powder 700gm 5x700gm
Sponge 1 nos 1 nos
Application Blade 1 nos 1 nos
Hand Gloves 1 pair 1 pair
2 Component | 10 Colours
Particulars 1 kg 5 kg
Resin+ Filler Powder 900gm 5x900gm
Hardner 100gm 500gm
Sponge 1 nos 1 nos
Application Blade 1 nos 1 nos
Hand Gloves 1 pair 1 pair
shape

related products

Explore Our Complete
Construction
Chemical Range